THERMACOR’S DUO-THERM “505” is a factory-fabricated, pre-insulated piping system that incorporates polyurethane foam and a rugged, non-corrosive, High Density Polyethylene (HDPE) jacket with a Class A Steel Conduit System.
The system is pre-fabricated and pre-engineered as a complete system that is drainable, dryable, and air testable with total manufactured components: pipes, loops, ells, tees, end seals, gland seals, and anchors. The system is built to withstand heavy traffic/earth loads, high water tables, and the most corrosive of soils. An ERM leak detection system can be embedded in the foam insulation to detect groundwater intrusion.
Carrier Pipe:
• As Specified by Engineer
Conduit:
• 6” ≤ c ≤ 26” – 10 Gauge
• 28” ≤ c ≤ 36” – 6 Gauge
• 38” ≤ c ≤ 42” – 4 Gauge
Outer Jacket:
• High Density Polyethylene (HDPE)
Outer Insulation:
• Polyurethane foam
Carrier Pipe Insulations:
• As specified by engineer
Prefab systems are part of a complete piping system designed and manufactured to jobsite dimensions in order to minimize field welds.
THERMACOR’S POLYCOR™ PLATINUM™ is a factory-fabricated, pre-insulated piping system for hot water distribution up to 180°F.
THERMACOR’S FERRO-THERM D.I. is a factory-fabricated, pre-insulated piping system for below and above ground distribution of chilled water or domestic hot water.
THERMACOR’S CLASS A Steel Conduit systems are used for steam, condensate, and high temperature hot water system.
Reviews
There are no reviews yet.